P4 Standard LED Series > envisionTEC /Perfactory

본문 바로가기
Add favorit +

 envisionTEC /Perfactory

 envisionTEC  >  envisionTEC /Perfactory   >   P4 Standard LED Series

P4 Standard LED Series


P4 Standard LED Series


Download P4 Standard LED Series Data Sheet

EnvisionTEC의 Perfactory 4 Standard LED 시리즈는 낮은 비용에 쉽게 유지보수를 할 수 있는 사용자 편의성을 높인 3D 프로토타입 생산 시스템 입니다.
Texas Instruments®의 최신 기술인 Direct Light Projection 기술을 이용한 P4 Standard 시리즈는 출력 파트의 날카로운 디테일을 살리면서도 짧은 시간 내에 3D 모델을 생산할 수 있습니다.
Perfactory 4 Standard LED 시리즈는 주문 제작된 LED light system을 사용합니다. 이 새로운 시스템은 현 시장의 다른 어떤 light projector system 보다 파워풀하고 효과적 입니다.
또한 많은 베네핏을 제공하는데 예를 들면 구동비용이 더 저렴하고 픽셀 간에 더 날카로운 명암대비가 있어 파트의 디테일을 최대치로 올린다는 점이 있습니다.
이와 같이 향상된 제품 력으로 현 시장에서 최고의 해상도와 정밀도를 구현하는 동시에 비용을 절감하는 light source를 이용한 Perfactory 4 Standard LED를 만나 보시기 바랍니다.


Applications Entertainment, Jewelry, Consumer Goods, Education, Medical Devices, Manufacturing




Build Envelope

192 x 120 x 180 or 230 mm (7.6 x 4.7 x 7.09 or 9.06 in.)

XY Resolution*

100 µm (0.0039 in.)

Dynamic Voxel Resolution in Z (material dependent)**

0.0010” (25 µm) to 0.0059” (150 µm)

Projector Resolution

1920 x 1200 Pixels

Native Voxel Size

100 µm (0.0039 in.)

Voxel Size With Optional Enhanced Resolution Module

50 µm (0.0020 in.)

Data Handling



1 Year Included

Materials Available
Strong, clear material with flexible capabilities
Prototype and end-use model printing
Flexible, holding high stress and force
Easily cast any injection wax pattern.
for direct investment casting of products for the jewelry market
Custom hearing device applications
for quick 3D print molds for thermoplastic injection molding
direct investment casting for the Jewelry market
fast design verification models
Hearing Aid applications distinguished for soft durability
for very high resolution tough & stiff parts
Prototype and end-use model printing
Polyurethane-like resin that 3D prints end-use and prototype parts that compete with injection molded plastics
Utilizing a built in Ethernet interface, the Perfactory® 4 DSP can connect directly to a PC workstation or be integrated into a network. The Perfactory® 4 DSP has an embedded PC, which allows the system to work independently from the pre-processing workstation and be remotely monitored from any computer on the network using the communication software that is integrated into the Perfactory® Software Suite.
  • LED outperforms the original P4 UHP light source in cost savings and has an estimated life expectancy of 10,000 hours
  • Economic material use with no vat
  • Minimized components make the system user serviceable
  • Low acquisition costs
  • Delivered and installed with all relevant software to enable automatic support generation and perfect model production
  • Material changeover can be done quickly and easily

Footprint (L x W x H): 73 x 48 x 135 cm (29 x 19 x 53 in.)

Weight: Weight: 85 kg (188 lbs)

Please note RC90 resin requires a special formulation for use on the Perfactory 4 LED families of 3D printers

상호 : 주식회사 자이브솔루션즈  /  사업자등록번호 : 208-86-01155  /  대표이사 : 윤두훈
주소 : 경기도 성남시 분당구 구미동 158 하나 EZ타워 6층  /  전화 : 031-726-5076  /  팩스 : 031-726-5016
Copyright ⓒ JIVE Solutions. All rights Reserved.