Otoflash Post Curing Light Pulsing Unit > envisionTEC /Accessories

본문 바로가기
Add favorit +


 envisionTEC /Accessories

 3D Printer  >  envisionTEC /Accessories   >   Otoflash Post Curing Light Pulsing Unit

Otoflash Post Curing Light Pulsing Unit

본문

 
 
The Otoflash is a light polymerization chamber for the hardening/curing of light curing resins for jewelry, dental, and otoplastic applications. Two photoflash lamps at the bottom of the curing chamber operate in a work mode with a frequency of 10 flashes per second. The photo-flash lamps produce a very intensive light radiation in a spectrum from 300 up to 700 nm. Because of this intensive light radiation, a better hardening of the materials is possible, resulting in materials with good physical values and reduced content of residual monomer versus using other lamp types with a different light emitting spectrum.
 

Inner Chamber Dimensions: 120 x 120 x 50 mm

Curing Chamber Access: Top Loading

Inner Chamber Dimensions

- 120 x 120 x 50 mm (4.72 x 4.72 x 1.97 in.)

Curing Chamber Access

- Top Loading

Operating Voltage

- 100,115,230,volt AC, Selectable

Nominal Frequency

- 50/60 Hz

Power Input

- About 250 W

Radiated/Flashed Lamp Power

- About 200 W (100 X/Lamp)

Light Power

- Ca. 1/3 of lamp power ≈ 66 W

Spectral Distribution

- 300-700 nm, max 400-500

Light Power in Interesting Spectrum

- Ca 1/3 of lamp power ≈ 11 W

Flash Rate

- 10 flashes per second

Digital Timer

- Adjustable from 1 up to 9999 flashes

Life Time

- 300-500 hours operating time (10.8 – 18 Mio flashes)

Outer Dimensions

- 310 x 310 x 140 mm (12.2 x 12.2 x 5.51 in.)

Weight

- 6kg (13.23 lbs)


상호 : 주식회사 주원  /  주소 : 경기도 성남시 분당구 구미동 158 하나 EZ타워 6층  /  사업자등록번호 : 220-81-11584  /  대표이사 : 이운명
전화 : 031-726-1585  /  팩스 : 031-726-5070
Copyright ⓒ Joowon Industrial. All rights Reserved.